SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg
SILK PLA 1.75 mm 1 kg

CCTree

SILK PLA 1.75 mm 1 kg

Udsalgspris119,00 DKK Normal pris151,37 DKK
Spar 32,37
Farve:Green
Antal:
På lager
ST-PLA normalcolor (5)

Printing Parameters For ST-PLA


Filament Type ST-PLA
Brand CCTREE
Printer Type Makerbot,FlashForge,Monoprice,Ultimaker XYZprinting,ALUNAR,Creality,Ender 3,QIDI
Exturder Type Direct Drive/Bowden Tube
         
Layer Height 0.1-0.3 mm
Fill Density >0.4 mm
Print Speed 40-80 mm/s
Printing Temperature 190-220
Build Bed Temperature 0-50
Retraction Speed 20-50 mm/s

Comparison of physical performance indicators


  PLA PLA+ ST-PLA
Tensile Strength 65MPa 60MPa 47.9MPa
Elongation at Break 0.05 0.1 0.82
Tensile Modulus 2870MPa 2850MPa 2710MPa
Flexural Modulus 3283MPa 3243MPa 2520MPa
Flexural Strength 97MPa 97MPa 70.7MPa
IZOD Impact Strength 16kJ/m 30kJ/m 162J/m
Shore Hardness 105A 105A 54D
Printing Temperature 190-220℃ 190-220℃ 190-220℃
Hot Bed Temperature 55-65℃ 55-65℃ 45-60℃
Density 1.24g/cm3 1.24g/cm3 1.24g/cm3
Melt Flow Index 3.2-4.0(190℃/2. 16kg) 3.2-4.0(190℃/2. 16kg) 6-10(190℃/2.16kg)
performance comparison ST-PLA>PLA+>PLA

CCTREE ST-PLA Filament Advantage


1. Wide Compatibility:Works perfectly with most FDM 3d printers on the market, such as Creality MK3, Ender 3, Monoprice FlashForge,QID,etc.

2. Tangle Free: Perfect filament winding(Neat winding) that can aviod any tangel with Great printing experience.

3. Easy Print:Excellent layer adhesion to reduce warpage,Low shrinkage rate.It's no need to heat the bed or print in a closed chamber, and no warping when print large models.

4. High toughness:With Special formula improved to be up to 5 Times tougher then normal PLA.

5. Excellent Impact Resistance&Strength

6. Super Good Performance: Cold Resistance& Moisture Resistance;Under -10℃ Still remain certain toughness and After unealed,Can Store at least 6-10 Months Without Change the Quality.



HURTIG LEVERING

Bestil inden kl. 12 og vi sender samme dag.