








Anycubic
Photon M3 Max 🆕
Den ikoniske Anycubic Photon serie har altid været pioneren indenfor SLA print. Med den nye Anycubic Photon M3 serie rykkes grænsen endnu en gang!
M3 Plus leveres med en 13” 7K Mono skærm, som giver en ekstremt høj detaljegrad.
Skærmen er beskyttet af Anycubics skærmbeskyttelse, så skærmens levetid forlænges. Det betyder at dråber af resin ikke kræver en udskiftning af Mono skærmen.
Print hastigheden på Photon M3 Max er på hele 100mm/t, hvilket betyder at du kan printe en 12 cm høj figur på blot 1,2 time, hvilket er 1,8 timer hurtigere end konkurrenterne.
Med Photon M3 Max skal du ikke længere bekymre dig om du løber tør for resin midt i et print. Printeren leveres med en resinpumpe, der kan pumpe resin fra flasken og direkte ned i resinkarret.
Photon M3 Max er den mellemste printer i M3-serien, og har et printareal på 198x164x300 mm, hvilket er det største areal i kategorien.
Den nye printplade har en laserskåret overflade, hvilket sikrer markant bedre vedhæftning end de tidligere Photon modeller.

7K mono screen
Large 13" mono screen in 7

Precise z-axis
Provides detailed prints

Large print area
298 x 164 x 300 mm

Never run dry
Photon M3 Plus comes with an external resin pump, so you never run out

Technical specifications
Exposure screen: 13.6" monochrome
Printing accuracy: 6,480 x 3,600 px (7K)
Contrast ratio: 450:1
Light source: Parallel matrix (LED lights x 84)
Build plate: Laser engraved platform
Printing speed: ≤ 6 cm/hr
Control panel: 4.3" resistive touch-control
Data input: USB-A 2.0
Rated power: 120W
Print size: 30.0 x 29.8 x 16.4 cm / 11.8 x 11.7 x 6.46 in. (HWD)
Printing volume: 14.7 L / 498.5 oz
Machine size: 59.6 x 40.0 x 40.8 cm / 23.5 x 15.7 x 16 in. (HWD)
Machine weight: 26 kg / 57.3 lb

Use your imagination
With a high-quality 13.6" monochrome screen, you get a construction area of up to 298 x 164 x 300 mm

High degree of detail
7K resolution and a z-axis with high precision, provide prints in fantastic quality

New build plate
The new build plate has a textured surface that makes adhesion significantly better.

Resin pump
The new automatic resin pump system ensures that you do not run out of resin in the middle of a print. This is especially good if you print large prints

Matrix light
With Anycubiuc LightTurbo Matrix, you get a stronger light source, which makes faster printing possible

High degree of detail
The printer has an LCD screen with a 450:1 contrast, which is 125% better than the competition (200:1). The high contrast gives higher quality in the print

Faster printing
The maximum print speed of the Photon M3 Plus is 100 mm/h. It only takes 1.2 hours to print a 12 cm high figure, which is approx. 1.8 hours faster than the competition.

Protective film
The LCD screen is protected by Anycubic protective film, which extends the life of the screen

Fully compatible slicer
Anycubic Photon Workshop is fully compatible with all Anycubic resin printers. It is perfect for setting all parameters. Free and professional
Included equipment

Manual

Funnel

Tool

Spatula

Resin vessel

Platform

Wire

Wi-Fi antenna

Face mask

Gloves

USB stick

Screws

Screen protection

Leveling paper

Resin pump