Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic
Anycubic AirPure 2 stk - Tilbehør til 3D print fra Anycubic Nordic

Anycubic

Anycubic AirPure 2 stk

249,00 DKK 289,00 DKK
Utsolgt

Inkludert mva Frakt kalkulert i kassen

🚚 Fri fragt ved ordrer over 500,- i DK
📦Hurtig levering 1-2 hverdage
👍Sendes fra Taastrup DK
🛡️1 års garanti
🛠️Lokalt servicecenter


Features

  • Breathing Free When Resin 3D Printing: Anycubic AirPure is designed to eliminate the smell of resin and purify the air all around, which provides a safer 3d printing experience.
  • Portable and Rechargeable Design: Not only does it feature small size and light weight, but also it has built-in rechargeable battery. There's a type-C charging port in the front, and it comes with a charging cable.
  • High-speed and Ultra-low Noise Fan: Strong and durable fan can control air circulation to effectively filter impurities and bring clean air. Smooth running, low noise and long lifespan create a quiet and comfortable environment.
  • Strong Adsorption and Replaceable Filter: The activated carbon filter can be used for 3-6 months. To ensure the normal operation of Anycubic AirPure, please replace the filter in time, and the replacement is available on the official website.


    •  


     

    Designed for Resin 3D Printers

    The chemical composition of photosensitive resin makes it give off an unpleasant smell, which has annoyed many users. Anycubic AirPure can directly adsorb the odor molecules volatilized from the resin into the activated carbon channel, and then complete the air purification process, which is a safe and environmentally friendly long-term purification method.

    High-speed, Low Noise, Long Lifespan Fan

    In order to further facilitate the activated carbon, Anycubic AirPure is equipped with high-quality fan with a speed of 5,000 rpm, an operating noise of ≤45 decibels, and an life span of ≤30,000 hours. The fan boasts stronger wind, faster air circulation, lower noise, and more lasting and stable operation.

    High-density Activated Carbon Filter

    Activated carbon allows strong adsorption performances and filtration effects. Anycubic AirPure is designed with a high-density activated carbon filter with a thickness of 18 mm and a weight of 17g, which can effectively absorb the smell and impurities of resin during printing.

    Large Battery Long Endurance

    The Anycubic AirPure has a built-in high-end, rechargeable 18650 lithium battery with a 2,000mAh battery capacity. After fully charged, it can run continuously for more than 14.5 hours. The Anycubic AirPure will continue to offer you air purification even when you need to print large models.

    Compact & Easy to Use Design

    Anycubic AirPure is smaller than the size of a can of Coke: 115 x 46 x 46mm, so it can be placed anywhere in the 3D printer. And even the weight of it is about 410g that is also lighter than a can of Coke. Just press the power button and enjoy free breathing, it's pretty easy and convenient to use.

    Replaceable Filter, Easy to Operate

    Activated carbon needs to be replaced regularly. The high-density activated carbon core (single piece) of the Anycubic AirPure can last for 3-6 months. After the filter is saturated with adsorption, the filter can be easily replaced by simply removing the top cover of the purifier, refreshing adsorption vitality, which gives you a fresh and clean user experience.



    setup-with-printerdimensionsparts-list

    HURTIG LEVERING

    Bestil inden kl. 12 og vi sender samme dag.