








Anycubic
Photon M3 Plus 🆕
Den ikoniske Anycubic Photon serie har altid været pioneren indenfor SLA print. Med den nye Anycubic Photon M3 serie rykkes grænsen endnu en gang!
M3 Plus leveres med en 9,25” 6K Mono skærm, som giver en ekstremt høj detaljegrad.
Skærmen er beskyttet af Anycubics skærmbeskyttelse, så skærmens levetid forlænges. Det betyder at dråber af resin ikke kræver en udskiftning af Mono skærmen.
Print hastigheden på Photon M3 Plus er på hele 100mm/t, hvilket betyder at du kan printe en 12 cm høj figur på blot 1,2 time, hvilket er 1,8 timer hurtigere end konkurrenterne.
Med Photon M3 Plus skal du ikke længere bekymre dig om du løber tør for resin midt i et print. Printeren leveres med en resinpumpe, der kan pumpe resin fra flasken og direkte ned i resinkarret.
Photon M3 Plus er den mellemste printer i M3-serien, og har et printareal på 245x197x122 mm, hvilket er samme størrelse som Mono X/Mono X6K.
Den nye printplade har en laserskåret overflade, hvilket sikrer markant bedre vedhæftning end de tidligere Photon modeller.
Photon M3 Plus supporteres af Anycubic Cloud, så du kan kontrollere dine print via en app. Dermed kan du holde øje med udvikling
6K mono screen
Large 9.25" mono screen in 6K

Lighturbo
Anycubic LightTurbo has a powerful light

Anycubic Cloud
Control your printer with Anycubic's new App

Never run dry
Photon M3 Plus comes with an external resin pump, so you never run out

Technical specifications
Exposure screen: 9.25 inch monochrome screen
Printing volume: 5.9 liters / 199.1 ounces
Print size: 24.5 x 19.7 x 12.2 cm / 9.6 x 7.8 x 4.8 inches (HW)
Printing platform: Laser engraved aluminum alloy platform
Light source: Parallel matrix light source (40 LED beads)
Machine leveling: 4-point manual leveling
Printing accuracy: 6K (5,760 x 3,600 pixels)
Printing speed: ≤10cm/hour
Control panel: 5-inch resistive touch screen
Data input: USB-A 2.0 & 3.0 interface
Power supply: On/Off switch
Rated power: 144W
Machine dimensions: 47.5 x 36 x 29 cm (HW)
Machine weight: ~12kg

Use your imagination
With a high-quality 9.25" monochrome screen, you get a construction area of up to 245 x 197 x 122 mm, and a level of detail of 34μm.

Anycubic Cloud
Supports USB-A 2.0 / LAN / WAN and USB-A 3.0. Whether it's transferring files or starting the print, you can control it via the Anycubic Cloud app.

New build plate
The new build plate has a textured surface that makes adhesion significantly better.

Resin pump
The new automatic resin pump system ensures that you do not run out of resin in the middle of a print. This is especially good if you print large prints

Matrix light
With Anycubiuc LightTurbo Matrix, you get a stronger light source, which makes faster printing possible

High degree of detail
The printer has an LCD screen with a 350:1 contrast, which is 75% better than the competition (200:1). The high contrast gives higher quality in the print

Faster printing
The maximum print speed of the Photon M3 Plus is 100 mm/h. It only takes 1.2 hours to print a 12 cm high figure, which is approx. 1.8 hours faster than the competition.

Protective film
The LCD screen is protected by Anycubic protective film, which extends the life of the screen

User friendly
Easy and clear user platform.
Included equipment

Manual

Funnel

Tool

Spatula

Resin vessel

Platform

Wire

Wi-Fi antenna

Face mask

Gloves

USB stick

Screws

Screen protection

Leveling paper

Resin pump